Aluminum alloy door basic information

classic Classic list List threaded Threaded
1 message Options
Qizhenbi Qizhenbi
Reply | Threaded
Open this post in threaded view
|  
Report Content as Inappropriate

Aluminum alloy door basic information

<p>From the details of the wooden door to determine the strength of the factory one: look at the paint, look at the paint to see, touch the fullness of the paint film, this should be more than a few  Backyard Deck Costs  times will read. The paint is full, indicating that the paint of good quality, strong polymerization, the closure of the wood is good, while the painting process is relatively perfect, there will be no jerry-building suspects; stand to the side of the door to find the facade of the reflective angle, look at the surface</p><p> Of the film is smooth, orange peel phenomenon is obvious, there is no protruding small particles, if there are more  where to buy wooden replacement slats for a bench  obvious small particles, indicating that the factory coating equipment is relatively simple, at least no full pressure clean spray paint room, which Is the necessary equipment to control the quality of paint.</p><p> If the orange peel phenomenon is obvious, indicating that the film baking process, but off; on the fancy modeling wooden doors, depending on the edge of the lines  how to bulid stairs with wpc  that produce modeling, especially the corners (that is, can not see the corner) The phenomenon of cracking. And then ask the type of paint, the basic answer is PU paint (polyurethane paint), we note that the advantages of PU paint is easy to polish, the processing time and effort, the drawback is the film soft, slightly bumps prone to white dents The If at least one layer of paint in the paint is PE paint, it will greatly flint grey patio deck manufacturer   reduce this possibility.</p>
Loading...