groove in the front and back plate

classic Classic list List threaded Threaded
1 message Options
Qizhenbi Qizhenbi
Reply | Threaded
Open this post in threaded view
|  
Report Content as Inappropriate

groove in the front and back plate

<p>absorption plate in turn. The sound absorbing board is installed vertically and the notch is on the right side. It starts from the left and is installed in the same way. Two sound-absorbing board ends should be no less than 3mm gap. 3, the sound absorbing board has the margin requirements, you can use the number 580, side line to carry out the edge, the edge of the fixed screw. For the right side, the upper side of </p>
<p>the margin line installation, for lateral expansion reserved 1.5mm, and can use silica gel seal. Install the Raiders wooden sound-absorbing panels, small temporary house is here to share, I hope for your help to install wooden sound-absorbing panels, sound-absorbing board for more knowledge, please continue to pay attention to house decoration network.Wooden sound-absorbing panels according to acoustics </p>
<p>principle refined processing, sound-absorbing plate composed of veneer, core material and sound-absorbing mat, usually wooden sound-absorbing panels and wood slot hole sound-absorbing board two, with the same type, light weight, high strength, beautiful appearance, elegant color, good decorative effect, three-dimensional sense of strong, the assembly is simple and convenient. The classification of </p>
<p>20 inch interior floors<br />
pool deck surface options kitchen<br />
advantage to composite decking supplier</p>
Loading...